CLS x Overhead swing drive Applications
Suitable for many public areas but chiefly for applications inside buildings, as follows:
The Caledonian swinging door operator features refined technology, compact design and practically silent operation.
The CLS x is Caledonian’s first swing door operator that can be used as the basis for a wide variety of swing door applications
Options
- To provide helpful solutions for the disabled in blocks of flats, hospitals and homes for the elderly
- For administration and office buildings
- For public transport buildings
- For restaurants and hotels
The Caledonian swinging door operator features refined technology, compact design and practically silent operation.
The CLS x is Caledonian’s first swing door operator that can be used as the basis for a wide variety of swing door applications
Options
- Can be used as automatic door control system to provide fire and smoke protection
- Extendable with master-slave function (two overlapping door leaves)
- Available in both FULL POWER or LOW ENERGY models
- Operator also available as INVERS, FIRE and in-ground models
CLS GLX Door Operators from light to heavy duty
Automatic swing door operator suitable for use on lightweight interior doors. Supplied complete with mounting plate and sliding arm (pull function). The CLS300/L is simple to install, and can be mounted to the wall or direct to the door leaf (if AC supply is disconnected). Suitable for applications where a quiet, slimline door operator is required, with a low resistance should the door need to be opened manually using the 'push and go' function. The CLS300/L has a built in back check and is suitable for use in medium traffic areas. The opening and closing function is motor driven, with protection against mechanical overload. Can be used in conjunction with the range of ABLOY motor locks and selected solenoid locks to provide effective, hands-free access control without compromising on security. Integral control of electric locks (24VDC output), includes lock control relay with NO/NC contacts. Pressure pads, push button switches, card readers and radar (infra-red and microwave) may also be used to operate the CLS300/L. Please note that all door operator products are supplied on the condition that they are installed by trained CLS door operator installers.
Service
CLS offer tailored service contract packages to suit individual requirements. There are three standard options:
OPTION 1 - Biannual Service
Two service visits per annum. Carry out full inspection and provide compliance certification to BS7036:1996.
OPTION 2 - Biannual Service & Labour
As Option 1 above plus unlimited call outs* during office hours (M-F 8am-5pm). Only parts are chargable.
OPTION 3 - Biannual Service, Labour & Parts
As Option 2 above plus all parts required**.
* unlimited call outs do not include misuse or abuse.
** parts damaged as a result of misuse or abuse are not included.
Repair
Should your equipment breakdown we can promptly attend site to investigate and repair any fault. Our vehicles carry a comprehensive array of spare parts enabling economical 1st visit repairs. Should we be unable to repair your equipment on the 1st visit we will promptly advise you of any further work required along with a quotation to return to site and carry out the work.
Installation
CLS can also supply and install bespoke shop-front and entrance systems with manual or automatic doors. Please contact us for a free survey
OPTION 1 - Biannual Service
Two service visits per annum. Carry out full inspection and provide compliance certification to BS7036:1996.
OPTION 2 - Biannual Service & Labour
As Option 1 above plus unlimited call outs* during office hours (M-F 8am-5pm). Only parts are chargable.
OPTION 3 - Biannual Service, Labour & Parts
As Option 2 above plus all parts required**.
* unlimited call outs do not include misuse or abuse.
** parts damaged as a result of misuse or abuse are not included.
Repair
Should your equipment breakdown we can promptly attend site to investigate and repair any fault. Our vehicles carry a comprehensive array of spare parts enabling economical 1st visit repairs. Should we be unable to repair your equipment on the 1st visit we will promptly advise you of any further work required along with a quotation to return to site and carry out the work.
Installation
CLS can also supply and install bespoke shop-front and entrance systems with manual or automatic doors. Please contact us for a free survey
,
Low Energy / Power Assisted - Normally activated by Push Pads. Particularly suitable for upgrading existing entrance systems to meet DDA requirements. These doors can be used like any other manual door but the user has the option of opening them by simply pressing a push pad located near the doorway. No additional safety sensors are normally required as the force exerted by Low Energy operators is reduced to a safe level.
Fully Automatic Swing Doors- Normally activated by motion sensors allowing the door to be open by the time the user reaches the door without interaction. Safety sensors must be fitted to protect the user from being stuck by the opening or closing face of the door.
Single Sliding & Bi-Parting Automatic Doors provide smooth, effortless, and safe opening and closing. Particularly suited to high traffic entrances. Also suitable for use on escape routes by the provision of a monitored battery backup and will automatically fail open in the event of fire alarm activation or mains power failure if required.
Folding Automatic Doors provide the benefits of sliding doors and are particularly suitable for installation where space is restricted. Users enjoy safe, comfortable, unimpeded access and contact free passage.
Revolving Automatic Doors have one major advantage over most other types of automatic doors in that they drastically reduce heat loss as they do not provide a clear opening. Users must enter into a segment and travel with the revolving door until able to exit. Due to the high cost o
Fully Automatic Swing Doors- Normally activated by motion sensors allowing the door to be open by the time the user reaches the door without interaction. Safety sensors must be fitted to protect the user from being stuck by the opening or closing face of the door.
Single Sliding & Bi-Parting Automatic Doors provide smooth, effortless, and safe opening and closing. Particularly suited to high traffic entrances. Also suitable for use on escape routes by the provision of a monitored battery backup and will automatically fail open in the event of fire alarm activation or mains power failure if required.
Folding Automatic Doors provide the benefits of sliding doors and are particularly suitable for installation where space is restricted. Users enjoy safe, comfortable, unimpeded access and contact free passage.
Revolving Automatic Doors have one major advantage over most other types of automatic doors in that they drastically reduce heat loss as they do not provide a clear opening. Users must enter into a segment and travel with the revolving door until able to exit. Due to the high cost o
